Print this page.

Clear a Cut Length mexico-flag-button-36w.jpg quebec-flag_button-w36.jpg

If there are any cuts in lines AFTER the last line you edited, they will remain.

If you want to END the list after your last edit, before exiting with [Stop], do the following.

 

The messages shown below SCROLL across the screen if longer than the LCD's 16 character width.

SawGear is in Foot mode for these examples.

User steps

LCD screen displays

  1. Press [Start].

SawGear moves immediately to the next length and displays its current position.

3_-27dot1875in-400x30.jpg

  1. Press [Clr].

SawGear clears the length out of the current line AND the following line.

3_-emptycut-400x30.jpg

Any lines beyond that will NOT be cleared. If you later enter new cut lengths in the cleared lines, the lines beyond them will reappear in the list and can be used.

  • Press [STOP] to exit a list.

leaving-cut-list-400x30.jpg

See also: Using a Saved Cut List