Print this page.

Password Protection mexico-flag-button-36w.jpg quebec-flag_button-w36.jpg

SawGear can be secured by a password to prevent its use by unauthorized persons.

The following steps show how to activate password protection.

Once a password has been set, SawGear cannot be operated without it, so DON'T LOSE IT!

The messages shown below SCROLL across the screen if longer than the LCD's 16 character width.

User steps

LCD screen displays

  1. Unplug SawGear from AC power.

 

  1. While holding down the [/] key, plug SawGear into AC power.

password1-400x30.jpg

password2-400x30.jpg

password3-400x30.jpg

password4-400x30.jpg

password5-400x30.jpg

  1. Press [Start].

password6-400x30.jpg

  1. Enter a password consisting of 4 to 8 digits, and press [Start].

password7-400x30.jpg

  1. Re-enter password and press [Start].

please-wait-400x30.jpg

 

press-Start-to-move-400x30.jpg

  1. Press [Start].

SawGear homes itself and then scrolls:

 

ready-to-work1-400x30.jpg

ready-to-work2-400x30.jpg

ready-to-work3-400x30.jpg

SawGear is now ready to use!

 

The password MUST be entered whenever SawGear is powered up by plugging it into AC power.

The password WILL be demanded when powering up using the soft start key: soft-start-41.jpg

See also: Change the Password, Deactivate the Password