Start SawGear

If SawGear is plugged into power but does not display the active screen, start it up using the soft start key:

SawGear will automatically power off the display when not in use, unless sleep mode is turned off.

• When powered ON, SawGear emits a low hum, which indicates that SawGear is ON and ready to use.

• When powered OFF using the soft start key, the hum stops, indicating that SawGear is OFF.

• To power it ON again, push the soft start, and listen for the hum. The display will also come on.

• If you have turned on Password Protection, then the password MUST be entered whenever SawGear has to be powered on.